glass bottle manufacturer

Neither method protects flavor better in every drink. Hot fill typically suits non-carbonated drinks with a pH of 4.6 or below, because the drink is heated briefly and filled hot. Cold fill with tunnel pasteurization suits carbonated drinks and other formulas that should not be filled hot, because the sealed package is heated in stages. Your formula, package, and carbonation decide which one protects your flavor best.

The good news: you do not have to guess. As a beverage manufacturer offering hot fill and cold fill co-packing, Matrix Bottling Group runs both processes in-house, so we can match the method to your drink and confirm it with a trial run.

Which method protects flavor better, hot fill or tunnel pasteurization?

Hot fill and cold fill with tunnel pasteurization can each protect flavor, and the better choice depends on the drink. Hot fill fits non-carbonated drinks with a pH of 4.6 or below. Cold fill with tunnel pasteurization fits carbonated drinks and formulas that should not be filled hot. Matching the process to your formula protects flavor best.

In practice, three questions narrow the choice quickly: Is the drink carbonated? Is its pH 4.6 or below? Which container will it use? The sections below walk through each method so you can see where your drink fits.

How does hot fill protect flavor in shelf-stable drinks?

Hot fill protects flavor by keeping heat exposure short and the process simple. The drink is heated to around 180–200 °F, filled, and held for 2–5 minutes, with higher temperatures pairing with shorter holds. The product must be naturally acidic or acidified to a pH of 4.6 or below. Hot fill suits many non-carbonated drinks.

The University of Georgia's extension service describes this process, called hot-fill-hold, as the way to reach commercial sterility for acidic products (UGA CAES Field Report). At Matrix, our hot fill lines include built-in tunnel pasteurization and temperature controls to keep shelf-stable beverages safe and protect their flavor.

How does cold fill with tunnel pasteurization protect flavor?

Cold fill with tunnel pasteurization protects flavor by filling the drink at cool temperatures and heating it only after the container is sealed. The sealed package then moves through a tunnel that warms it in stages. Because the drink is not filled hot, this method works for carbonated drinks and other formulas that should stay cool during filling.

Heat treatment in a tunnel is measured in pasteurization units (PUs). One PU equals one minute at 60 °C, or an equivalent combination of time and temperature. For temperature-sensitive products, Matrix uses careful handling protocols and tunnel pasteurization to maintain freshness and meet regulatory requirements.

Hot fill vs. cold fill: side-by-side comparison

Hot fill and cold fill with tunnel pasteurization differ in when heat is applied, which drinks they suit, and how they treat carbonation. The table below compares both methods side by side. Use it as a starting point, then confirm the match with a trial on your own formula.

Factor Hot fill Cold fill with tunnel pasteurization
When heat is applied Drink is heated before filling, filled hot, then held Drink is filled cool, sealed, then heated in the tunnel
Typical heat profile Around 180–200 °F for a 2–5 minute hold Measured in pasteurization units (1 PU = 1 minute at 60 °C)
Carbonation Typically non-carbonated drinks Suits carbonated drinks
pH Naturally acidic or acidified to 4.6 or below Confirm with your co-packer based on your formula
Flavor consideration Short, high heat exposure; results vary by formula Heat applied after sealing; results vary by formula
Often a fit for Non-carbonated, acidic drinks Sodas, energy drinks, and heat-sensitive or carbonated formulas

What does the research say about heat and flavor?

Research shows that heat can affect a drink's aroma and heat-sensitive components differently depending on the formula and the heat dose. A grape juice study found no significant flavor change from tunnel pasteurization, while other studies found measurable changes in orange juice aroma compounds and fruit nectar vitamin C. Results vary by drink, which is why formula-specific trials matter.

Because each study looks at a different drink and heat dose, a trial on your actual formula gives the clearest answer.

Which drinks are best suited to each method?

Carbonated drinks such as sodas and energy drinks are typically paired with cold fill and tunnel pasteurization, while non-carbonated acidic drinks are typically paired with hot fill. Cold liquid holds dissolved CO2 better than hot liquid, which is why carbonated products are handled cool. Your formula's pH, packaging, and flavor profile then refine the choice.

If you are developing a carbonated or functional drink, explore our soda and soft drink manufacturing and energy drink manufacturing services. We also offer alcohol manufacturing for brands in that category. The chemistry behind cold CO2 retention is covered in this chemistry textbook chapter on solubility.

How do you choose the right process for your formula?

Choosing between hot fill and cold fill starts with four questions: is the drink carbonated, is its pH 4.6 or below, which container will it use, and how heat-sensitive is the flavor? Answering these narrows the choice, and a trial run on your actual formula confirms it before full production.

  1. Check carbonation. Carbonated drinks usually point to cold fill with tunnel pasteurization.
  2. Measure pH. Acidified foods must reach an equilibrium pH of 4.6 or below with water activity above 0.85 under 21 CFR Part 114.
  3. Pick your container early. Packaging affects which process fits, so share it with your co-packer up front.
  4. Run a trial. Taste-test samples from each suitable process before committing to a full run.

How Matrix Bottling Group runs hot fill and cold fill with tunnel pasteurization

Matrix Bottling Group offers both hot fill and cold fill with tunnel pasteurization, so your formula determines the process rather than the other way around. All of our bottling plants have built-in tunnel pasteurization and hot and cold fill lines, backed by in-house testing, batch tracking, and an R&D lab for private label partners.

Our three facilities can produce up to 100 million bottles per month without sacrificing quality, drink flavor, or consistency, and our programs include SQF, HACCP, and FDA compliance and registration. Learn more about our beverage co-packing and private label programs, or contact our team to talk through your formula.

Frequently Asked Questions

Can carbonated drinks be hot filled?

Carbonated drinks are typically not hot filled. Carbon dioxide (CO2) dissolves more easily in cold liquid than in hot liquid, so carbonated products are usually filled cool and then sealed. Cold fill with tunnel pasteurization is the usual path for sodas and energy drinks, since the container is heated only after it is sealed.

What is a pasteurization unit (PU), and why does it matter for flavor?

A pasteurization unit (PU) measures heat treatment, where one PU equals one minute at 60 °C or an equivalent combination of time and temperature. Tunnel pasteurization is measured in PUs. In one grape juice study, 13.7 PUs reduced yeast to undetectable levels without significantly changing flavor.

Is hot fill only for acidic drinks?

Hot fill is designed for drinks that are naturally acidic or acidified to a pH of 4.6 or below. Federal rules for acidified foods in 21 CFR Part 114 set the 4.6 pH limit and a water activity above 0.85. Drinks above that pH need a different approach, so confirm your formula's pH early.

Which packaging works with hot fill and tunnel pasteurization?

Packaging choice affects which process fits. Hot fill requires containers that handle hot product, and tunnel pasteurization requires sealed containers that handle heating after filling. Share your container type with your co-packer early so the process, package, and formula are matched together. Matrix can refer you to vetted component suppliers ahead of production.

How long does a hot-fill hold take?

A hot-fill hold typically lasts 2–5 minutes after the drink is heated to around 180–200 °F and filled. Higher temperatures generally pair with shorter holds, and lower temperatures with longer holds. The exact settings depend on the formula and are set during process development with your co-packer.

How do I find out which method suits my formula?

Start with a trial on your actual formula. Share your drink's pH, carbonation level, and target shelf life with your co-packer, then compare flavor from each suitable process. Studies show heat effects differ by drink, so a side-by-side trial gives the clearest answer. Matrix offers consultations and an in-house R&D lab for private label partners.

Can I switch from hot fill to tunnel pasteurization without changing my recipe?

Switching processes may call for a formula review, because heat exposure and packaging change. Heat-sensitive ingredients respond differently by drink, so run a trial and taste-test before committing. Your co-packer can advise whether adjustments are needed for flavor, carbonation, and shelf life.

Next Step: Match the Process to Your Drink

Hot fill and cold fill with tunnel pasteurization can both protect flavor when matched to the right formula. Matrix Bottling Group runs both at all three of our facilities, so we can recommend the best fit for your drink. Schedule a consultation to start, or explore our beverage manufacturing services.


Back to Blog
Contact us media
Accessibility: If you are vision-impaired or have some other impairment covered by the Americans with Disabilities Act or a similar law, and you wish to discuss potential accommodations related to using this website, please contact our Accessibility Manager at 213.568.6180.
Contact Us